Common Problems About Solar Lights
Feb 08, 2022
1. The whole set of solar street lights is not bright
The whole set of solar street lights does not light up. The possible reasons are incorrect wiring, problems with the light source, short circuit of the water inlet controller of the line, and long rainy days. First check the controller of the solar street light, look at the signs above, check whether the corresponding marked lines are connected correctly, and then check whether the terminals of the controller have water marks or rust. If there is a possibility that the controller is damaged, if not, measure Battery voltage, 12V solar street light system battery voltage is lower than 10.7V, the battery can no longer be used, replace the battery. When there is light on a sunny day, check whether the solar panel has current and voltage output. If there is, the solar panel is normal, and if not, the solar panel is damaged. If none of the above problems exist, then there is a problem with the light source of the led lamp. Check the connection between the light source and other power sources to see if the light is on. If it is not on, change the light source of the lamp. If it is a series of rainy days, the whole set of solar street lights does not light normally. Because the solar panels do not generate electricity, the power stored in the battery has been consumed. When there is light on sunny days, the solar panels continue to charge the battery, and the solar street lights will light up normally.
2. The light source of led lamps shines
The main reason why the LED light source is shining is the wiring problem, or the battery may be out of power. First of all, check whether the wiring is correct, whether the connection and packaging of each node are normal, and you can also reconnect the wiring from the beginning. Measure the open circuit voltage of the battery with DC voltage. If the voltage is lower than 12v, the battery is depleted. Connect the positive and negative electrodes of the battery to the positive and negative electrodes of the solar panel correctly. After charging for 1-2 days, the system can be used normally.
3. The lighting time is short, and it will not light up when it rains
There is only one reason for this kind of failure. The capacity of the battery is too small. If it is newly installed, it means that the battery capacity issued by the manufacturer is false and cannot meet the lighting requirements of continuous rainy days. If the solar street light has been used for several years , indicating that the battery has decayed to its service life, and the battery can be replaced.
4. The light source of led lamps is not fully bright
Some of the light sources of Led lamps are bright, and some are not. At present, the LED light sources of solar street lights commonly used on the market are officially arranged, showing some lights and some lights, indicating that the quality of the LED beads is not good or the specifications are not uniform, resulting in the same voltage and current. It may also be that there is virtual welding during the welding process, and some lamp beads are in poor contact. In this case, just replace the LED light source, and the solar street light will be on normally.





